Southside Place concrete supply inc

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right licensed concrete contractors contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the licensed concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

concrete resurfacing contractors

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for licensed concrete contractors in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

decorative concrete business

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

pouring concrete driveway

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

Starting A Concrete Cleaning Pressure Washer Business

concrete resurfacing contractors

Concrete formwork is the use of support structures and moulds to create structures out of concrete which is poured into the moulds.

There are many different types of formwork used in construction, usually differing according to what the building requirements and challenges are. Formwork is used by creating moulds out of wood, steel, aluminium or prefabricated forms into which the concrete is poured. This is then allowed to harden and set after which it is stripped, or in the case of stay-in-place formwork it is left as part of the structure.

Formwork allows contractors to cast and construct the main parts of a building which are required to be strong and support the structure such as floors and walls, as well as smaller parts of a building such as stairs relatively quickly.

Types of Formwork
There are many different types of concrete formwork used in construction. Traditional timber formwork uses timber and plywood to form the moulds for pouring. This method is cheaper than other methods, yet not as effective because wood is not as strong as metal or steel. However, on complicated sections of buildings which need great attention to detail, timber formwork is still widely used.

Concrete can crack, which was problematic for constructions throughout history as they ran the risk of collapse. Today reinforced concrete is used which is a much stronger substance and rarely cracks. When concrete is reinforced, it is filled with metal rods and reinforcing bars with other materials such as glass and plastic fibre.

Concrete formwork is widely used in present day construction. With the many different types of formwork available, any building project is more easily achievable because different methods can be used to achieve the desired result. When reinforced, concrete is a virtually indestructible material, perfect for major construction work, as well as small, detailed and complex structures.

Concrete Foundations And Construction Companies For Erecting Buildings

ready mix cement company

Sturdy, durable and economical, concrete is one of the most frequently used construction materials in the United States. Called pourable stone, it was once used by the Egyptians to build structures that still stand more than 3,600 years later. The standard concrete used by most Minneapolis general contractors combines sand, gravel and water with Portland cement.

Different Concretes and Their Uses

Many different varieties of concrete exist and a Minneapolis construction company generally chooses a particular variety for its purposes based on its particular compressive strength, a quality expressed in terms of pounds per square inch (psi) and megapascals (MPa). Some of the different types of concrete are:

Regular Concrete - Standard, or regular concrete, comes in a variety of pre-mixed packages that vary in their water-absorption and setting qualities, depending on the specific aggregates used. For the most part, regular concrete mixes offer a compressive strength in the range of 1450 psi (10 MPa) to 5800 psi (40 MPa). As such, it is not recommended for heavy, load-bearing structures. Minneapolis general contractors commonly use regular concrete for basic installations in residential buildings, for lining curbs and for strengthening sidewalks and driveways.

Shotcrete - Also known as Gunite, shotcrete is generally used where formwork is unnecessary, such as when building against rock surfaces or vertical soil. It is also used for rock support, especially while tunneling. In some cases, additives such as fiber reinforcement and accelerators may be added to the mix.

Concrete, in its myriad of forms, has become an indispensable part of our everyday life. All forms of concrete have to undergo the correct hydrating and hardening process to optimize their unique physical and chemical properties. In particular, care should be taken to mix the cement blend thoroughly in order to produce uniform, high-quality concrete. The right Minneapolis general contractor will be able to use a variety of types and styles of concrete to make your construction project the best and most cost-efficient that it can be.

TEXAS

Southside Place licensed concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right patio concrete contractors contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the patio concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

local ready mix concrete

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for patio concrete contractors in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

concrete contractors

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

concrete wall demolition

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

How to Hire a Local Concrete Cutting Company

poured concrete wall construction

Spancrete is an American manufacturer of precast concrete products and machinery. Spancrete produces precast, prestressed concrete products that are used in commercial, industrial, institutional, residential and multifamily construction projects in the Midwest and Southeast. The company also manufactures and sells hollowcore extrusion machines that are used to produce precast concrete, internationally.

In the years following World War II, America was enjoying an unprecedented period of economic prosperity. In 1946, Henry Nagy and his brother-in-law, Arthur Hintz, founded the West Allis Concrete Products company in West Allis, Wisconsin. The concrete block manufacturer thrived in the rapidly growing economy and was manufacturing as many as 1,000 concrete blocks each day.

By 1951, West Allis Concrete Products was receiving high-quantity orders to supply concrete block for Milwaukee County Stadium, Wisconsin State Fair Park, and Kohl's Department Stores, as well as new risers for Comiskey Park. The company had grown so large that it required expansion, and it did so by purchasing Genesee Sand and Gravel Company and the Farchione Block Company.

In 1953, Nagy traveled to Germany to examine a unique precast concrete manufacturing machine called a Hollowcore extruder. Though damaged by a World War II bomb, Nagy purchased the extruder and its patents and brought them back to the United States.[1]

When the extruder was brought back to the U.S., Nagy repaired the machine and began making prestressed, precast hollowcore concrete slabs. Nagy referred to the slabs as, "Spancrete."[2]

Spancrete manufactures a variety of architectural and structural precast products, including hollowcore plank, wall panels, beams, columns, double tees, risers, balconies and landings, bridge girders, sound walls, and stairs.

Spancrete Global Services is the division of Spancrete responsible for the manufacture and sales of Spancrete machines. Until January 2012, the machinery division was its own corporation known as Spancrete Machinery Corporation.[3] Spancrete Global Services sells and services Spancrete machinery customers in the United States and abroad. Internationally, Spancrete machines are used in Russia, Spain, Japan, Egypt, Korea, China, Australia, Turkey, Mexico, Israel, Trinidad, Denmark, Germany, and Switzerland.[4]

In March 2007, Spancrete purchased Florida Precast Industries, Inc. The company, based in Sebring, Florida, produces precast concrete products for residential, multifamily, commercial, industrial, and institutional applications.[5]

The Spancrete Manufacturers Association is an alliance of corporations that own Spancrete machines and produce precast, prestressed concrete. The group was formed in 1960 to promote the use of precast, prestressed concrete products and building systems, worldwide.

Spancrete precast products have been used in the construction of the following, well-known structures and infrastructures:

Concrete Construction Projects Covered Within Contracting Companies

ready mix cement company

Spancrete is an American manufacturer of precast concrete products and machinery. Spancrete produces precast, prestressed concrete products that are used in commercial, industrial, institutional, residential and multifamily construction projects in the Midwest and Southeast. The company also manufactures and sells hollowcore extrusion machines that are used to produce precast concrete, internationally.

In the years following World War II, America was enjoying an unprecedented period of economic prosperity. In 1946, Henry Nagy and his brother-in-law, Arthur Hintz, founded the West Allis Concrete Products company in West Allis, Wisconsin. The concrete block manufacturer thrived in the rapidly growing economy and was manufacturing as many as 1,000 concrete blocks each day.

By 1951, West Allis Concrete Products was receiving high-quantity orders to supply concrete block for Milwaukee County Stadium, Wisconsin State Fair Park, and Kohl's Department Stores, as well as new risers for Comiskey Park. The company had grown so large that it required expansion, and it did so by purchasing Genesee Sand and Gravel Company and the Farchione Block Company.

In 1953, Nagy traveled to Germany to examine a unique precast concrete manufacturing machine called a Hollowcore extruder. Though damaged by a World War II bomb, Nagy purchased the extruder and its patents and brought them back to the United States.[1]

When the extruder was brought back to the U.S., Nagy repaired the machine and began making prestressed, precast hollowcore concrete slabs. Nagy referred to the slabs as, "Spancrete."[2]

Spancrete manufactures a variety of architectural and structural precast products, including hollowcore plank, wall panels, beams, columns, double tees, risers, balconies and landings, bridge girders, sound walls, and stairs.

Spancrete Global Services is the division of Spancrete responsible for the manufacture and sales of Spancrete machines. Until January 2012, the machinery division was its own corporation known as Spancrete Machinery Corporation.[3] Spancrete Global Services sells and services Spancrete machinery customers in the United States and abroad. Internationally, Spancrete machines are used in Russia, Spain, Japan, Egypt, Korea, China, Australia, Turkey, Mexico, Israel, Trinidad, Denmark, Germany, and Switzerland.[4]

In March 2007, Spancrete purchased Florida Precast Industries, Inc. The company, based in Sebring, Florida, produces precast concrete products for residential, multifamily, commercial, industrial, and institutional applications.[5]

The Spancrete Manufacturers Association is an alliance of corporations that own Spancrete machines and produce precast, prestressed concrete. The group was formed in 1960 to promote the use of precast, prestressed concrete products and building systems, worldwide.

Spancrete precast products have been used in the construction of the following, well-known structures and infrastructures:

TEXAS

Southside Place small concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right decorative concrete contractors contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the decorative concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

concrete repair service

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for decorative concrete contractors in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

decorative concrete business

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

residential concrete construction

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

U.S. Concrete, Inc

residential concrete companies

Most decent size construction projects usually require the need for a concrete cutting contractor. Quite often medium and large construction projects require utilities to moved, added or relocate to different areas. A concrete cutting company can provide the solution for access and relocation of utilities. Concrete flat saws are used to cut floors for access underneath existing slabs. Wall sawing cuts square or rectangle openings in walls. Core drilling cuts round holes in walls and floors. Gaining access opening in floors and wall allows utilities to be relocated or passed through or moved to other locationsHowever, before you hire the first concrete cutting company in the phone book, a little homework should be a priority before hiring a contractor for your project. Concrete cutting, wall sawing, concrete breaking and removal is dangerous work. Spending a little time before you hire someone can pay great dividends and greatly reduce your exposure to liability. Have your concrete cutting contractor provide you with three documents before he starts work. Have the contractor provide you with his license number and have it checked out. Make sure its authentic and up to date. Most states have a government run entity that allows anyone to check the status of any contractor in their state. Also have the contractor provide you with a copy of his Workers Compensation policy and a copy of his Liability Insurance Policy. You will be well served to have all three documents provided to you before anyone sets foot on you project. Having all three documents current, and in good standing most likely tells me the contractor is running a reputable business. If he can't provide you with all three, move along and call another company. If a contractor does not have all three documents and he starts work on your project, the owner, or company hiring the contractor may be exposed to liability should something go wrong; such as, an injury on the project. Concrete cutting, wall sawing, concrete breaking and removal is dangerous work. It involves large motorized machinery and saw blades spinning at high RPM. The potential for something to go wrong is always present, so don't add more risk and liability to yourself by not checking out who is working for you. A few extra minutes before can save you a lot of grief in the future. So plan ahead and research the contracting company before you hire. Say no to anyone who can not provide you the necessary documentation. This rule should apply to any contractor, or subcontractor.

Precast Construction: Awesome And Unique Construction Segment

demolition of concrete

Most decent size construction projects usually require the need for a concrete cutting contractor. Quite often medium and large construction projects require utilities to moved, added or relocate to different areas. A concrete cutting company can provide the solution for access and relocation of utilities. Concrete flat saws are used to cut floors for access underneath existing slabs. Wall sawing cuts square or rectangle openings in walls. Core drilling cuts round holes in walls and floors. Gaining access opening in floors and wall allows utilities to be relocated or passed through or moved to other locationsHowever, before you hire the first concrete cutting company in the phone book, a little homework should be a priority before hiring a contractor for your project. Concrete cutting, wall sawing, concrete breaking and removal is dangerous work. Spending a little time before you hire someone can pay great dividends and greatly reduce your exposure to liability. Have your concrete cutting contractor provide you with three documents before he starts work. Have the contractor provide you with his license number and have it checked out. Make sure its authentic and up to date. Most states have a government run entity that allows anyone to check the status of any contractor in their state. Also have the contractor provide you with a copy of his Workers Compensation policy and a copy of his Liability Insurance Policy. You will be well served to have all three documents provided to you before anyone sets foot on you project. Having all three documents current, and in good standing most likely tells me the contractor is running a reputable business. If he can't provide you with all three, move along and call another company. If a contractor does not have all three documents and he starts work on your project, the owner, or company hiring the contractor may be exposed to liability should something go wrong; such as, an injury on the project. Concrete cutting, wall sawing, concrete breaking and removal is dangerous work. It involves large motorized machinery and saw blades spinning at high RPM. The potential for something to go wrong is always present, so don't add more risk and liability to yourself by not checking out who is working for you. A few extra minutes before can save you a lot of grief in the future. So plan ahead and research the contracting company before you hire. Say no to anyone who can not provide you the necessary documentation. This rule should apply to any contractor, or subcontractor.

TEXAS

Southside Place concrete contractors delaware

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right concrete supply inc contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the concrete supply inc contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

concrete slab foundation

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for concrete supply inc in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

residential concrete companies

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

poured concrete wall construction

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

Concrete Products

concrete driveway contractors

Concrete formwork is the use of support structures and moulds to create structures out of concrete which is poured into the moulds.

There are many different types of formwork used in construction, usually differing according to what the building requirements and challenges are. Formwork is used by creating moulds out of wood, steel, aluminium or prefabricated forms into which the concrete is poured. This is then allowed to harden and set after which it is stripped, or in the case of stay-in-place formwork it is left as part of the structure.

Formwork allows contractors to cast and construct the main parts of a building which are required to be strong and support the structure such as floors and walls, as well as smaller parts of a building such as stairs relatively quickly.

Types of Formwork
There are many different types of concrete formwork used in construction. Traditional timber formwork uses timber and plywood to form the moulds for pouring. This method is cheaper than other methods, yet not as effective because wood is not as strong as metal or steel. However, on complicated sections of buildings which need great attention to detail, timber formwork is still widely used.

Concrete can crack, which was problematic for constructions throughout history as they ran the risk of collapse. Today reinforced concrete is used which is a much stronger substance and rarely cracks. When concrete is reinforced, it is filled with metal rods and reinforcing bars with other materials such as glass and plastic fibre.

Concrete formwork is widely used in present day construction. With the many different types of formwork available, any building project is more easily achievable because different methods can be used to achieve the desired result. When reinforced, concrete is a virtually indestructible material, perfect for major construction work, as well as small, detailed and complex structures.

List of construction trades

concrete wall demolition

Spancrete is an American manufacturer of precast concrete products and machinery. Spancrete produces precast, prestressed concrete products that are used in commercial, industrial, institutional, residential and multifamily construction projects in the Midwest and Southeast. The company also manufactures and sells hollowcore extrusion machines that are used to produce precast concrete, internationally.

In the years following World War II, America was enjoying an unprecedented period of economic prosperity. In 1946, Henry Nagy and his brother-in-law, Arthur Hintz, founded the West Allis Concrete Products company in West Allis, Wisconsin. The concrete block manufacturer thrived in the rapidly growing economy and was manufacturing as many as 1,000 concrete blocks each day.

By 1951, West Allis Concrete Products was receiving high-quantity orders to supply concrete block for Milwaukee County Stadium, Wisconsin State Fair Park, and Kohl's Department Stores, as well as new risers for Comiskey Park. The company had grown so large that it required expansion, and it did so by purchasing Genesee Sand and Gravel Company and the Farchione Block Company.

In 1953, Nagy traveled to Germany to examine a unique precast concrete manufacturing machine called a Hollowcore extruder. Though damaged by a World War II bomb, Nagy purchased the extruder and its patents and brought them back to the United States.[1]

When the extruder was brought back to the U.S., Nagy repaired the machine and began making prestressed, precast hollowcore concrete slabs. Nagy referred to the slabs as, "Spancrete."[2]

Spancrete manufactures a variety of architectural and structural precast products, including hollowcore plank, wall panels, beams, columns, double tees, risers, balconies and landings, bridge girders, sound walls, and stairs.

Spancrete Global Services is the division of Spancrete responsible for the manufacture and sales of Spancrete machines. Until January 2012, the machinery division was its own corporation known as Spancrete Machinery Corporation.[3] Spancrete Global Services sells and services Spancrete machinery customers in the United States and abroad. Internationally, Spancrete machines are used in Russia, Spain, Japan, Egypt, Korea, China, Australia, Turkey, Mexico, Israel, Trinidad, Denmark, Germany, and Switzerland.[4]

In March 2007, Spancrete purchased Florida Precast Industries, Inc. The company, based in Sebring, Florida, produces precast concrete products for residential, multifamily, commercial, industrial, and institutional applications.[5]

The Spancrete Manufacturers Association is an alliance of corporations that own Spancrete machines and produce precast, prestressed concrete. The group was formed in 1960 to promote the use of precast, prestressed concrete products and building systems, worldwide.

Spancrete precast products have been used in the construction of the following, well-known structures and infrastructures:

TEXAS