Sunnyvale patio concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right licensed concrete contractors contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the licensed concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

concrete repair service

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for licensed concrete contractors in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

associated concrete contractors

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

concrete slab foundation

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

Concrete Foundations And Construction Companies For Erecting Buildings

concrete driveway contractors

The following is a list of trades in construction.

How to Hire a Local Concrete Cutting Company

concrete firms

The following is a list of trades in construction.

TEXAS

Sunnyvale top concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right biggest concrete companies contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the biggest concrete companies contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

concrete flooring companies

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for biggest concrete companies in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

concrete manufacturing companies

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

ready mix cement company

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

Don't Hire a Concrete Contractor Before You Read This!

concrete resurfacing contractors

Precast concrete products have evolved over the years and now their use is widespread in many industries. The endless ability to innovate with concrete means that as new technologies have been developed the scope for different products has increased dramatically.Construction is one of the main and most obvious uses for concrete. As the industry has developed the number of products and their applicability has had dramatic effects in terms of reducing and simplifying building projects. Products include retaining walls, foundations, flooring (hollowcore, block and beam), beams, lintels, bridges, cladding, complete precast structures... the list could go on. As engineers and designers get their heads around the possibilities, the number of products and applications increases. Agriculture offers a variety of opportunities for utilising concrete products. Silage clamps, slurry stores, slurry channels, grain stores, retaining walls, suspended flooring systems, feed and water troughs. Due to concrete's strength and ability to withstand extreme conditions it is ideal for this type of use.Traffic and roads provide another environment where concrete products play a major part. Whether it be concrete barriers, or retaining walls at the side of roads; concrete products are widely used on our roads.Utilites, water and waste products offer another range of applications. Manholes, water tanks, culverts, septic tanks and many more products which play a major part in this area of business. Concrete products are everywhere around us and provide countless benefits and opportunities. As new technology is introduced the scope for further products increases and hopefully so will the benefits we derive from them. The above articles lists some of the main uses for these products, but by no stretch of the imagination is this an exhaustive list!

Concrete pump

residential concrete construction

A turnkey or a turnkey project (also spelled turn-key) is a type of project that is constructed so that it can be sold to any buyer as a completed product. This is contrasted with build to order, where the constructor builds an item to the buyer's exact specifications, or when an incomplete product is sold with the assumption that the buyer would complete it.

A turnkey project or contract as described by Duncan Wallace (1984) is:[1]

…. a contract where the essential design emanates from, or is supplied by, the Contractor and not the owner, so that the legal responsibility for the design, suitability and performance of the work after completion will be made to rest … with the contractor …. 'Turnkey' is treated as merely signifying the design responsibility as the contractor's.

A turnkey computer system is a complete computer including hardware, operating system and application(s) designed and sold to satisfy specific business requirements.

Turnkey refers to something that is ready for immediate use, generally used in the sale or supply of goods or services. The word is a reference to the fact that the customer, upon receiving the product, just needs to turn the ignition key to make it operational, or that the key just needs to be turned over to the customer.[2][3] Turnkey is often used to describe a home built on the developer's land with the developer's financing ready for the customer to move in. If a contractor builds a "turnkey home" they frame the structure and finish the interior. Everything is completed down to the cabinets and carpet. "Turnkey" is commonly used in the construction industry, for instance, in which it refers to the bundling of materials and labour by Home Builder or General Contractor to move into the home without owner involvement.[4] 'Turnkey' is also commonly used in motorsports to describe a car being sold with drivetrain (engine, transmission, etc.) to contrast with a vehicle sold without one so that other components may be re-used.

Similarly, this term may be used to advertise the sale of an established business, including all the equipment necessary to run it, or by a business-to-business supplier providing complete packages for business start-up.[2] An example would be the creation of a "turnkey hospital" which would be building a complete medical centre with installed medical equipment.

The term turnkey is also often used in the technology industry, most commonly to describe pre-built computer "packages" in which everything needed to perform a certain type of task (e.g. audio editing) is put together by the supplier and sold as a bundle. This often includes a computer with pre-installed software, various types of hardware, and accessories. Such packages are commonly called appliances. A website with a ready-made solutions and some configurations is called a turnkey website.

Turnkey products are synonymous to "off-the-shelf" solutions and not customized.

In real estate, turnkey is defined as a home or property that is ready for occupation for its intended purpose, ie., a home that is fully functional, needs no upgrading or repairs (move-in ready). In commercial use, a building set up to do auto repairs would be defined as turnkey if it came fully stocked with all needed machinery and tools for that particular trade.[citation needed] The turnkey process includes all of the steps involved to open a location including the site selection, negotiations, space planning, construction coordination and complete installation. Turnkey real estate also refers to a type of investment. This process includes the purchase, construction or rehab (of an existing site), the leasing out to tenants, and then the sale of the property to a buyer. The buyer is purchasing an investment property which is producing a stream of income.

In drilling, the term indicates an arrangement where a contractor must fully complete a well up to some milestone to receive any payment (in exchange for greater compensation upon completion).[5]

TEXAS

Sunnyvale concrete foundation companies

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right concrete foundation companies contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the concrete foundation companies contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

concrete floor companies

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for concrete foundation companies in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

concrete floor companies

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

pouring concrete driveway

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

What Does a Concrete Contractor Do?

concrete flooring companies

A turnkey or a turnkey project (also spelled turn-key) is a type of project that is constructed so that it can be sold to any buyer as a completed product. This is contrasted with build to order, where the constructor builds an item to the buyer's exact specifications, or when an incomplete product is sold with the assumption that the buyer would complete it.

A turnkey project or contract as described by Duncan Wallace (1984) is:[1]

…. a contract where the essential design emanates from, or is supplied by, the Contractor and not the owner, so that the legal responsibility for the design, suitability and performance of the work after completion will be made to rest … with the contractor …. 'Turnkey' is treated as merely signifying the design responsibility as the contractor's.

A turnkey computer system is a complete computer including hardware, operating system and application(s) designed and sold to satisfy specific business requirements.

Turnkey refers to something that is ready for immediate use, generally used in the sale or supply of goods or services. The word is a reference to the fact that the customer, upon receiving the product, just needs to turn the ignition key to make it operational, or that the key just needs to be turned over to the customer.[2][3] Turnkey is often used to describe a home built on the developer's land with the developer's financing ready for the customer to move in. If a contractor builds a "turnkey home" they frame the structure and finish the interior. Everything is completed down to the cabinets and carpet. "Turnkey" is commonly used in the construction industry, for instance, in which it refers to the bundling of materials and labour by Home Builder or General Contractor to move into the home without owner involvement.[4] 'Turnkey' is also commonly used in motorsports to describe a car being sold with drivetrain (engine, transmission, etc.) to contrast with a vehicle sold without one so that other components may be re-used.

Similarly, this term may be used to advertise the sale of an established business, including all the equipment necessary to run it, or by a business-to-business supplier providing complete packages for business start-up.[2] An example would be the creation of a "turnkey hospital" which would be building a complete medical centre with installed medical equipment.

The term turnkey is also often used in the technology industry, most commonly to describe pre-built computer "packages" in which everything needed to perform a certain type of task (e.g. audio editing) is put together by the supplier and sold as a bundle. This often includes a computer with pre-installed software, various types of hardware, and accessories. Such packages are commonly called appliances. A website with a ready-made solutions and some configurations is called a turnkey website.

Turnkey products are synonymous to "off-the-shelf" solutions and not customized.

In real estate, turnkey is defined as a home or property that is ready for occupation for its intended purpose, ie., a home that is fully functional, needs no upgrading or repairs (move-in ready). In commercial use, a building set up to do auto repairs would be defined as turnkey if it came fully stocked with all needed machinery and tools for that particular trade.[citation needed] The turnkey process includes all of the steps involved to open a location including the site selection, negotiations, space planning, construction coordination and complete installation. Turnkey real estate also refers to a type of investment. This process includes the purchase, construction or rehab (of an existing site), the leasing out to tenants, and then the sale of the property to a buyer. The buyer is purchasing an investment property which is producing a stream of income.

In drilling, the term indicates an arrangement where a contractor must fully complete a well up to some milestone to receive any payment (in exchange for greater compensation upon completion).[5]

Concrete Foundations And Construction Companies For Erecting Buildings

concrete slab foundation

A turnkey or a turnkey project (also spelled turn-key) is a type of project that is constructed so that it can be sold to any buyer as a completed product. This is contrasted with build to order, where the constructor builds an item to the buyer's exact specifications, or when an incomplete product is sold with the assumption that the buyer would complete it.

A turnkey project or contract as described by Duncan Wallace (1984) is:[1]

…. a contract where the essential design emanates from, or is supplied by, the Contractor and not the owner, so that the legal responsibility for the design, suitability and performance of the work after completion will be made to rest … with the contractor …. 'Turnkey' is treated as merely signifying the design responsibility as the contractor's.

A turnkey computer system is a complete computer including hardware, operating system and application(s) designed and sold to satisfy specific business requirements.

Turnkey refers to something that is ready for immediate use, generally used in the sale or supply of goods or services. The word is a reference to the fact that the customer, upon receiving the product, just needs to turn the ignition key to make it operational, or that the key just needs to be turned over to the customer.[2][3] Turnkey is often used to describe a home built on the developer's land with the developer's financing ready for the customer to move in. If a contractor builds a "turnkey home" they frame the structure and finish the interior. Everything is completed down to the cabinets and carpet. "Turnkey" is commonly used in the construction industry, for instance, in which it refers to the bundling of materials and labour by Home Builder or General Contractor to move into the home without owner involvement.[4] 'Turnkey' is also commonly used in motorsports to describe a car being sold with drivetrain (engine, transmission, etc.) to contrast with a vehicle sold without one so that other components may be re-used.

Similarly, this term may be used to advertise the sale of an established business, including all the equipment necessary to run it, or by a business-to-business supplier providing complete packages for business start-up.[2] An example would be the creation of a "turnkey hospital" which would be building a complete medical centre with installed medical equipment.

The term turnkey is also often used in the technology industry, most commonly to describe pre-built computer "packages" in which everything needed to perform a certain type of task (e.g. audio editing) is put together by the supplier and sold as a bundle. This often includes a computer with pre-installed software, various types of hardware, and accessories. Such packages are commonly called appliances. A website with a ready-made solutions and some configurations is called a turnkey website.

Turnkey products are synonymous to "off-the-shelf" solutions and not customized.

In real estate, turnkey is defined as a home or property that is ready for occupation for its intended purpose, ie., a home that is fully functional, needs no upgrading or repairs (move-in ready). In commercial use, a building set up to do auto repairs would be defined as turnkey if it came fully stocked with all needed machinery and tools for that particular trade.[citation needed] The turnkey process includes all of the steps involved to open a location including the site selection, negotiations, space planning, construction coordination and complete installation. Turnkey real estate also refers to a type of investment. This process includes the purchase, construction or rehab (of an existing site), the leasing out to tenants, and then the sale of the property to a buyer. The buyer is purchasing an investment property which is producing a stream of income.

In drilling, the term indicates an arrangement where a contractor must fully complete a well up to some milestone to receive any payment (in exchange for greater compensation upon completion).[5]

TEXAS

Sunnyvale top concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right top concrete contractors contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the top concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

residential concrete construction

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for top concrete contractors in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

concrete slab foundation

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

concrete repair service

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

Turnkey

concrete contractors

Making a decision on a concrete company is not always an easy one. There's are a lot of information you are going to to need to make an educated choice.

For example:

* How do they come recommended to me?
* How long have they been in business?
* Are they licensed,bonded and insured in the city I live in?
* Can I see previous work they've done
* What type of mix are the going to use
* Do they warranty their work if so, for how long.

In Ohio, Exterior mix, such as driveways, patios porches should be no less than 6.5 sack or 4000psi. Interior concrete no less than 6 sack or 3000psi. Concrete helps to beautify our homes and whether it's to park our vehicle on or to put our outside furniture on it lasts a long time. Choose your contractor wisely. I hope this information helps you.

How To Choose Concrete Contractors

concrete contractors Because it is a fluid, concrete can be pumped to where it is needed. Here, a concrete transport truck is feeding concrete to a concrete pumper, which is pumping it to where a slab is being poured. Pumping concrete into aluminum concrete formwork in Mexico.

A concrete pump is a machine used for transferring liquid concrete by pumping. There are two types of concrete pumps.

The first type of concrete pump is attached to a truck or longer units are on semi-trailers. It is known as a boom concrete pump because it uses a remote-controlled articulating robotic arm (called a boom) to place concrete accurately. Boom pumps are used on most of the larger construction projects as they are capable of pumping at very high volumes and because of the labour saving nature of the placing boom. They are a revolutionary alternative to line-concrete pumps.

The second main type of concrete pump is either mounted on a truck or placed on a trailer, and it is commonly referred to as a line pump or trailer-mounted concrete pump. This pump requires steel or flexible concrete placing hoses to be manually attached to the outlet of the machine. Those hoses are linked together and lead to wherever the concrete needs to be placed. Line pumps normally pump concrete at lower volumes than boom pumps and are used for smaller volume concrete placing applications such as swimming pools, sidewalks, and single family home concrete slabs and most ground slabs.

There are also skid mounted and rail mounted concrete pumps, but these are uncommon and only used on specialized jobsites such as mines and tunnels.

Until the early 20th century, concrete was mixed on the job site and transported from the cement mixer to the formwork, either in wheelbarrows or in buckets lifted by cranes. This required a lot of time and labor. In 1927, the German engineers Max Giese and Fritz Hull came upon the idea of pumping concrete through pipes. They pumped concrete to a height of 38 meters (125 ft) and a distance of 120 meters (130 yd). Shortly after, a concrete pump was patented in Holland in 1932 by Jacob Cornelius Kweimn (Jacobus Cornelius Kooijman). This patent incorporated the developer's previous German patent.[1]

Concrete pump designers face many challenges because concrete is heavy, viscous, abrasive, contains pieces of hard rock, and solidifies if not kept moving.

Play media Operating principle of piston pump with seat valves

Usually, piston pumps are used, because they can produce hundreds of atmospheres of pressure. Such piston-style pumps can push cylinders of heterogenous concrete mixes (aggregate + cement).

The pump below uses a transfer tube valve, and the one on the right uses seat valves.

To illustrate, below are data on a typical concrete sample pump BRF 42.14 H:

BRF 42.14 H pump

TEXAS