Taylor Lake Village patio concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right concrete contractors delaware contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the concrete contractors delaware contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

poured concrete wall construction

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for concrete contractors delaware in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

demolition of concrete

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

concrete wall demolition

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

The Use of Formwork in Construction

concrete resurfacing contractors

The concept of precast construction (which also refers as "prefabricated construction") includes those buildings where the majority of structural components are standardized and produced in plants in a location away from the building, and then transported to the site for assembly. These components are manufactured by industrial methods based on mass production in order to build a large number of buildings in a short time at low cost.The main features of this construction process are as follows: The division and specialization of the human workforce The flawless use of tools and other equipments, usually automated, in the production of standard, interchangeable parts and productsSince 2005, the demand for new commercial and residential buildings has been on the top than the other types of construction. Practically, precast construction is always more economical when compared to conventional multifamily residential, commercial, industrial or institutional construction anywhere in world.As per the load-bearing structural, precast construction can be categorize into the following categories: Large-panel systems Frame systems Slab-column systems with walls Mixed systemsList of Structural Precast Detailing Services: Precast Concrete Detailing Precast Wall Panels Detailing Precast Concrete Cladding Panels Detailing Precast Concrete Tilt-up Panels Detailing Precast Shop Drawings Precast Concrete Stairs Detailing Precast Erection Drawings Precast Concrete Column Detailing Precast Concrete Beam Detailing Precast Concrete Slab Detailing Post Tension Detailing Double Tee Detailing Non load bearing & Load bearing Column Cover and Cornices Hollow Core Slab Detailing Services Column Cap Plate Detailing Flat Slab Detailing Services As far as the concept of precast products is concerned, many states across the United States require a precast plant to be certified by either the Architectural Precast Association (APA), National Precast Concrete Association or Precast Prestressed Concrete Institute (PCI) for a precast producer to supply their product to a construction site sponsored by State and Federal DOTs.There are some numerous products which are utilizing precast/ prestressed concrete and majority of precast products can fall under one or more of the following categories: Agricultural Products Building and Site Amenities Retaining Walls Transportation and Traffic Related Products Utility Structures Water and Wastewater Products Cemetery Products Prestressed/Structural Products Double Wall Precast - Concrete Sandwich PanelsFurthermore, Tilt-up construction is also plays an important part of Precast Construction process. Of course, a question comes into your mind that, so what is the difference between tilt-up and other types of construction?The answer is, in traditional forms of wall construction, the walls can be built with CMU blocks or blocks faced with brick. A tilt-up building's walls are created horizontally in large slabs of concrete called panels. The panels are then lifted, or tilted up, into position around the building's slab. This means the tilt-up structure's exterior wall is virtually finished when it is tilted into place.Tilt-up construction provides numerous advantages over steel buildings either it is residential, commercial, institutional or other types of industrial building construction projects. Generally speaking, a one- to two-story structure larger than 50,000 square feet with less than 50% wall opening space is an excellent example for tilt-up concrete construction. Benefits of Tilt-up Construction:• Savings Construction Costs: by using this construction method, raw material costs can be reduced and of course it will also reduce the overall construction cost as well. In tilt-up construction method, the workers are typically lesser than the workers used in traditional construction. This way contractor can reduce labor costs. Because of the economies of scale, the larger the footprints for the building, the more these savings improve the project's total cost.• Fast Construction Schedule: Tilt-up construction offers several opportunities to "compress" the schedule and deliver the building very quickly. To erecting the walls in tilt-up construction is a faster process than building walls using traditional construction techniques. The trades can begin work earlier in the process on a tilt-up project, which allows greater overlapping of project phases. Because the building is made of ready-mix concrete from local sources, the chances of delay project is less than the traditional construction method.• Safety: Tilt-up concrete is a proven, safe method of construction.• Flexibility: Tilt-up concrete buildings are not prefabricated. Each one is custom-designed for the client's needs and preferences.

Concrete

concrete slab foundation

Concrete is an important material during construction. The mixing can be a tedious job especially when it has to be done manually. Getting the ratio wrong can end up with a mix that is not strong enough for the intended construction purpose. Concrete mixing is therefore one of the most important processes of construction that needs to be well done.Fortunately, the mixing of concrete no longer has to be a tedious process. This is because there are very good mixing companies offering mixing services. They cater for all mixing needs depending on the concrete needs that you have. They are services that can be enjoyed by both commercial and domestic clients with the best results. It is mixing process that is done by professionals and you can therefore be sure that everything will be as per your requirements.When looking for the best concrete mixing company, it is important that you check on how fast your order can be handled and also the process and the method used in pouring out the ready mix. You do not want to end up wasting lots of concrete in the process. The rates should also be competitive without negatively affecting the quality of the services that you get. A good concrete firm will accommodate even small scale jobs but still be in a position to easily handle even major concrete orders. Experience of the technicians and the company reputation can help you in choosing the best.

TEXAS

Taylor Lake Village decorative concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right patio concrete contractors contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the patio concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

residential concrete construction

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for patio concrete contractors in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

concrete plumbing

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

concrete slab foundation

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

A Simple Guide to Choosing Your Garage Storage

concrete wall demolition

U.S. Concrete, Inc.(NASDAQ: USCR) was set up in 1999 and now is based in Euless, Texas. The company’s main products are ready-mixed concrete and aggregates. Concrete serves customers widely distributed in Texas, California, New Jersey, New York, Oklahoma, and Washington D.C..[1][2]

1999-2001, U.S. Concrete, Inc acquired 21 companies and received $35 million IPO.
2002-2003, The company engaged in aggregates industry and completed 1 tuch-in acquisition.
2004 and beyond, It has been making more progress in the market via cross-selling opportunities.[3]

On October 30, 2012, Central Concrete Supply Co., Inc., a wholly owned subsidiary of U.S. Concrete, completed the acquisition of Bode Gravel Co. and Bode Concrete LLC.[4]

On Dec 17, 2012, a wholly owned subsidiary of U.S. Concrete, Inc., Smith Precast., Inc., sold substantially all of its assets for $4.27 million in cash and the assumption of certain obligations by Jensen Enterprises, Inc.[5]

U.S. Concrete, Inc. provides ready-mixed concrete, the company also provides crushed stone, sand, and gravel. U.S. Concrete has 150 standard ready-mixed concrete plants, 16 volumetric ready-mixed concrete facilities, and 14 producing aggregates facilities (2016). The company also involves building materials stores, hauling operations and broker product sales.[2][6][7][8]

2009, U.S. Concrete's National Research Laboratory was set up to develop enhanced concrete (supplementary cementitious materials, SCMs) and solutions. Besides, the company also maintains academic-industrial partnership with research teams at the University of California, Los Angeles (UCLA) and Arizona State University (ASU).
U.S. Concrete uses lime slurry and ARIDUS® Rapid Drying Concrete (addressing moisture-related floor covering failures) self-desiccating concrete technology. However, in 2012.12, the company's subsidiary sold Arizona Precast Operations.[2]

Don't Hire a Concrete Contractor Before You Read This!

concrete resurfacing contractors

Most decent size construction projects usually require the need for a concrete cutting contractor. Quite often medium and large construction projects require utilities to moved, added or relocate to different areas. A concrete cutting company can provide the solution for access and relocation of utilities. Concrete flat saws are used to cut floors for access underneath existing slabs. Wall sawing cuts square or rectangle openings in walls. Core drilling cuts round holes in walls and floors. Gaining access opening in floors and wall allows utilities to be relocated or passed through or moved to other locationsHowever, before you hire the first concrete cutting company in the phone book, a little homework should be a priority before hiring a contractor for your project. Concrete cutting, wall sawing, concrete breaking and removal is dangerous work. Spending a little time before you hire someone can pay great dividends and greatly reduce your exposure to liability. Have your concrete cutting contractor provide you with three documents before he starts work. Have the contractor provide you with his license number and have it checked out. Make sure its authentic and up to date. Most states have a government run entity that allows anyone to check the status of any contractor in their state. Also have the contractor provide you with a copy of his Workers Compensation policy and a copy of his Liability Insurance Policy. You will be well served to have all three documents provided to you before anyone sets foot on you project. Having all three documents current, and in good standing most likely tells me the contractor is running a reputable business. If he can't provide you with all three, move along and call another company. If a contractor does not have all three documents and he starts work on your project, the owner, or company hiring the contractor may be exposed to liability should something go wrong; such as, an injury on the project. Concrete cutting, wall sawing, concrete breaking and removal is dangerous work. It involves large motorized machinery and saw blades spinning at high RPM. The potential for something to go wrong is always present, so don't add more risk and liability to yourself by not checking out who is working for you. A few extra minutes before can save you a lot of grief in the future. So plan ahead and research the contracting company before you hire. Say no to anyone who can not provide you the necessary documentation. This rule should apply to any contractor, or subcontractor.

TEXAS

Taylor Lake Village licensed concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right patio concrete contractors contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the patio concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

concrete slab foundation

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for patio concrete contractors in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

concrete foundation installation

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

demolition of concrete

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

Turnkey

concrete resurfacing contractors

When looking for professionals that specialize in concrete services, you will find that a lot of these companies hire crews that have a thorough knowledge in quite a bit more than just concrete construction. To list just a few of these services would include such things as excavating, a wide range of concrete services, underground utility construction, and asphalt paving. By taking the time to do a little research before employing a specific company, it can ensure you receive competitive rates and projects that are completed under the highest of specifications and standards. Another element that business and homeowners should expect when consulting with a concrete contracting company is the assurance that all projects will be completed in a timely manner, with as little disruption as possible.While there are many subcontractors, do-it-yourselfers, professional home builders, and general contractors in Baltimore that require new concrete construction, there are also several home and business owners that run into different types of needs that involve concrete repair services. While not all businesses specialize in this particular element, it is crucial you learn the specific specialties of a company before finalizing an agreement. Insulated concrete forms construction and geothermal heating are often areas of expertise that are required during the construction of commercial and residential structures. In order for requirements such as these to be built to exact specifications, the company you contact must have expertise in reading plans that clients have submitted, regardless of the complexity of the project. This frequently involves various groundwork requirements that include easements, sidewalks, concrete foundations, approaches, flow lines, driveways, curbs and gutters, and others. Some of the projects that are even more complex can include such things as cross walks, and handicap ramps that are grade sensitive ADA compliant.When commercial or residential construction jobs are underway, it is important that the concrete professionals that are considered have a high level of technical experience and expertise in the specialized area of concrete services your project requires. It is also essential that they carry a varied selection of choices in aggregates, concrete building supplies, mix designs, reinforcing products, and admixtures.A vast majority of residential and commercial projects can involve quite a few different tasks that involve concrete construction. A list of these is as follows: -Concrete Patios -Roller Compacted Concrete -Poured Foundations -Retaining Walls -Concrete Paving -Concrete Steps -Building Slabs -Masonry and Block Walls -Decorative Concrete -Stamped Concrete -Sidewalks and Curbs -Concrete Barrier Walls -Concrete DrivewaysThe finished product of any job that involves concrete construction is highly dependent on the range of experience and level of technical expertise that crews supply to the projects of schools, commercial property owners, and homeowners. Another factor that is just as important is in knowing the equipment that will be used for your concrete construction project will be of the latest technology and sophistication.

How to Hire a Local Concrete Cutting Company

concrete contractors

Making a decision on a concrete company is not always an easy one. There's are a lot of information you are going to to need to make an educated choice.

For example:

* How do they come recommended to me?
* How long have they been in business?
* Are they licensed,bonded and insured in the city I live in?
* Can I see previous work they've done
* What type of mix are the going to use
* Do they warranty their work if so, for how long.

In Ohio, Exterior mix, such as driveways, patios porches should be no less than 6.5 sack or 4000psi. Interior concrete no less than 6 sack or 3000psi. Concrete helps to beautify our homes and whether it's to park our vehicle on or to put our outside furniture on it lasts a long time. Choose your contractor wisely. I hope this information helps you.

TEXAS

Taylor Lake Village patio concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your TEXAS home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right patio concrete contractors contractor in TEXAS .

Steps To Finding The Right Concrete Contractor in TEXAS

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the patio concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in TEXAS .

BEWARE OF CONCRETE CONTRACTOR SCAMS

associated concrete contractors

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for patio concrete contractors in TEXAS . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

concrete wall demolition

The 2nd step is hire a knowledgeable masonry contractor in TEXAS . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

decorative concrete business

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in TEXAS .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

The Use of Formwork in Construction

poured concrete wall construction

Concrete Marketing is an independent marketing company based in New York, USA, founded by Bob Chiappardi and Walter O'Brien in 1984.

Concrete Marketing was founded by Bob Chiappardi and Walter O'Brien in 1984.[1] Chiappardi was working in the mail room of Arista Records in New York whilst managing a few bands from Long Island and O'Brien was the founder of Relativity/Combat Records. The company name was chosen by plucking a name blindly from the Yellow Pages.[1] Concrete’s first client was RCA’s Grim Reaper. It was during the group's first tour that Chiappardi and O'Brien decided to start working as a marketing company, realizing that there were few people out there to properly service the metal community.[1]

During the 1984 New Music Seminarthey distributed around 200 flyers advertising Concrete and its services and by the end of the first day they had been approached by Rick Dobbis, then VP of marketing at Chrysalis Records, and were hired to work the first full length Armoured Saint record.[1]

In 1990 Chiappardi and O’Brien amicably split as business partners with Chiappardi taking the helm of Concrete Marketing and several other companies they had created, whilst Walter O’Brien took Concrete Management,[2] the management company that looked after Pantera, White Zombie and Prong.[3]

In 1992 the company began ‘Concrete Corner’, the purpose of which was the promotion and distribution of heavy metal records. This was achieved at a retail level by creating a unified sales force from the blending of independent and select chain stores that would adopt the program thus promoting select hard rock/metal/hardcore/alternative releases.

The format of the program was a store within a store concept and featured point of purchase displays, instore play, sales pricing, clerk recommendations and 15,000 monthly sampler CDs.[4] A free hard music magazine ‘Concrete Corner’ was available for the consumer, while ‘Network Newz’ provided information for the store owner.[5] Key reasoning behind these strategies was that small retailers fared better with niche markets such as heavy metal.

Occasionally for selected record launches, listening parties and midnight sales would be held the day before the release of the album proper.[6] The first listening party and midnight sale, in which 318 of the 325 stores participated, was for a Metallica boxset.

Listening parties would be advertised through instore banners, syndicated radio shows, and in magazines that featured the SoundScan hard music chart, owned by Concrete.[4] Invitations would go out to Concrete’s 20,000 strong database of fans and stores would invite their targeted customers by mail.[6]

The program was successful in offering more to the consumer who received freebies, discounts and won raffle prizes; to the store whose staff won prizes for the best display and to the label which could be certain that their product was being pushed to their target audience.

Other promotions that spun off Concrete Corner were "bonus disc" giveaways, where a bonus disc of artists from different labels was shrink wrapped to a highly anticipated new release from one of Concrete's clients.[7] The first of these type of promotions was for Korn’s album ‘Follow the Leader’ in which 100,000 copies of a compilation CD featuring tracks of breakthrough artists approved by Korn, as well as a previously unreleased Korn track were given away to each person who purchased the record. Baby band artists, at the time, featured on the first disc included Kid Rock, Powerman 5000, Orgy and Limp Bizkit.[1] Subsequent programs like this were executed for Megadeth and Rob Zombie,[8] among others.

In 1994, a Concrete Corner Tour was also put together. The concept of the tour was to initiate monthly events in each city where the tour was routed, with the focus of the shows being more on creating an affordable, fun evening of music[9] rather than being based specifically on recognition of the bands' names. This club tour allowed for the exposure of the bands to ticketholders who may not have seen them otherwise. Shows featured raffles and giveaways, and the first in the tour series saw Greta, Varga and Shootyz Groove take to the road.[10]

In 1998 Concrete Corner and Concrete Marketing won the ‘Related Products and Services Supplier of the Year’ award from National Association of Recording Merchandisers (NARM),[11] the trade organization of music retail industry. This was the first time this award was ever presented. In subsequent years, Concrete was nominated two more times.

RetailVision was a service Concrete provided which was based upon in-store video play. Concrete kept a database of 1200 stores nationwide, organized by genre in order to provide appropriate video reel compilations to each in the four genres of alternative (AlternateVision), rap (RapVision), hard rock (MetalVision) and pop music (HitVision).[8] The appropriate video cassette was distributed to each of the stores which allowed the active consumer to see all the new hits, while at the same time let new bands reach a wider audience because of the ever-expanding record store network. With this program, Concrete could help promote 30 - 40 new bands/songs a month.[5] Bands were selected for RetailVision via a regular weekly meeting of heavy metal fans who could vote for their favorite entries, thus helping the program maintain credibility and quality.[5]

Before producing Foundations, the first exclusively heavy metal trade publication, Concrete were contributing to Friday Morning Quarterback (FMQB). By the time they had worked the first Metallica record and the second Anthrax record and were beginning to amass a lot of metal clients, they decided it was time to begin their own newsletter, and so the first issue of Foundations was distributed in January 1988.

It was a bi-weekly publication that provided release information, tour itineraries and a breakdown of all Concrete's current projects, the idea behind it being that it should mimic the underground fanzines that were rife within the scene. It also featured the Concrete/Soundscan Hard Music chart. This chart was also syndicated not only in US regional publications such as Radioactive, Good Times and The Aquarian, but also in worldwide publications like Entertainment Weekly, Metal Hammer and Guitar World, reaching a combined readership of somewhere in the region of three million.[12]

Concrete Foundations And Construction Companies For Erecting Buildings

demolition of concrete

A turnkey or a turnkey project (also spelled turn-key) is a type of project that is constructed so that it can be sold to any buyer as a completed product. This is contrasted with build to order, where the constructor builds an item to the buyer's exact specifications, or when an incomplete product is sold with the assumption that the buyer would complete it.

A turnkey project or contract as described by Duncan Wallace (1984) is:[1]

…. a contract where the essential design emanates from, or is supplied by, the Contractor and not the owner, so that the legal responsibility for the design, suitability and performance of the work after completion will be made to rest … with the contractor …. 'Turnkey' is treated as merely signifying the design responsibility as the contractor's.

A turnkey computer system is a complete computer including hardware, operating system and application(s) designed and sold to satisfy specific business requirements.

Turnkey refers to something that is ready for immediate use, generally used in the sale or supply of goods or services. The word is a reference to the fact that the customer, upon receiving the product, just needs to turn the ignition key to make it operational, or that the key just needs to be turned over to the customer.[2][3] Turnkey is often used to describe a home built on the developer's land with the developer's financing ready for the customer to move in. If a contractor builds a "turnkey home" they frame the structure and finish the interior. Everything is completed down to the cabinets and carpet. "Turnkey" is commonly used in the construction industry, for instance, in which it refers to the bundling of materials and labour by Home Builder or General Contractor to move into the home without owner involvement.[4] 'Turnkey' is also commonly used in motorsports to describe a car being sold with drivetrain (engine, transmission, etc.) to contrast with a vehicle sold without one so that other components may be re-used.

Similarly, this term may be used to advertise the sale of an established business, including all the equipment necessary to run it, or by a business-to-business supplier providing complete packages for business start-up.[2] An example would be the creation of a "turnkey hospital" which would be building a complete medical centre with installed medical equipment.

The term turnkey is also often used in the technology industry, most commonly to describe pre-built computer "packages" in which everything needed to perform a certain type of task (e.g. audio editing) is put together by the supplier and sold as a bundle. This often includes a computer with pre-installed software, various types of hardware, and accessories. Such packages are commonly called appliances. A website with a ready-made solutions and some configurations is called a turnkey website.

Turnkey products are synonymous to "off-the-shelf" solutions and not customized.

In real estate, turnkey is defined as a home or property that is ready for occupation for its intended purpose, ie., a home that is fully functional, needs no upgrading or repairs (move-in ready). In commercial use, a building set up to do auto repairs would be defined as turnkey if it came fully stocked with all needed machinery and tools for that particular trade.[citation needed] The turnkey process includes all of the steps involved to open a location including the site selection, negotiations, space planning, construction coordination and complete installation. Turnkey real estate also refers to a type of investment. This process includes the purchase, construction or rehab (of an existing site), the leasing out to tenants, and then the sale of the property to a buyer. The buyer is purchasing an investment property which is producing a stream of income.

In drilling, the term indicates an arrangement where a contractor must fully complete a well up to some milestone to receive any payment (in exchange for greater compensation upon completion).[5]

TEXAS